Hardi HC5500

3 - Description
16
The navigation keys are initially used for set up in the menu system and working screen.
To navigate the menus then press to start this process. Then bottons can be used for the following:
Pressing will:
• Scroll up,
• Increase an value.
Pressing will:
• Scroll down,
• Decrease a value.
Pressing will:
• Move the cursor to the left.
Pressing will:
• Move the cursor to the right.
Pressing will:
• Escape a menu (hold to escape all menus),
• Escape without changing a value.
Pressing will:
• Clear a value,
• Reset the active register (hold until countdown is finished).
Pressing will:
• Enter a menu,
• Confirm (accept) a value.
When having the working screen then the navigation keys can be used for the following:
Pressing will:
• Increase volume rate in steps or select another preset application rate.
Pressing will:
• Decrease volume rate in steps or select another preset application rate.
Pressing will:
• Reset the active register (hold until countdown is finished).
Pressing will:
• Enter a menu.