Harley M6 - Angle Cylinder will Not Extend or Retract; Angle Cylinder will Not Hold Position; Trouble Shooting

MODEL M6 25
TROUBLE SHOOTING
Problem Possible Cause Solution
Angle cylinder will not Electrical failure. See skid-steer Operator’s
extend or retract. Manual.
Hydraulic system not activated. Engage roller drive motor before
attempting to move angle
cylinder.
Angle cylinder will not Check valve in manifold Repair or replace check valve.
hold position. malfunctioning.
Solenoid cartridge not returning Repair or replace solenoid
to closed position. cartridge.