Harman Kardon AVR 1510S User Manual

37
AVR
ENGLISH
Appendix
Surround Mode Description Incoming Bitstream or Signal
Virtual speaker Simulates 5.1 channels when only two speakers are present or a more enveloping
sound field is desired.
• Dolby Digital
• Analog (two-channel)
• Tuner
• PCM (32kHz, 44.1kHz or 48kHz)
DTS Digital Using a different encoding/decoding method than Dolby Digital,
DTS Digital also provides up to five discrete main channels, plus an
LFE channel.
• DTS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1, 3/1/.0 or .1, 2/2/.0 or .1,
3/2/.0 or .1
• DTS-ES Matrix (played as 5.1)
• DTS-ES Discrete (played as 5.1)
DTS-HD DTS-HD is a new high-definition audio format that complements the high-definition
video found on Blu-ray Disc and HD-DVD discs. It is transmitted using a DTS core
with high-resolution extensions. Even when only DTS 5.1 surround sound is desired
(or available, if the multizone system is in use), the higher capacity of high-resolution
discs serves up DTS at twice the bit rate used on DVD-Video discs.
• Blu-ray Disc or HD-DVD discs encoded with DTS-HD modes, delivered
via HDMI connection
DTS-HD Master Audio DTS-HD Master Audio technology delivers bit-for-bit reproductions of the studio master
recording in up to 7.1 channels for an incredibly accurate performance.
• Blu-ray Disc or HD-DVD discs encoded with DTS-HD Master Audio
technology, delivered via HDMI connection
DTS-ES Matrix DTS Extended Surround adds a single surround back channel to DTS 5.1 digital
surround sound. The Matrix version includes the surround back channel information
“matrixed” into the left and right (side) surround channels for compatibility with
5.1-channel systems.
• DTS-ES Matrix
DTS-ES Discrete DTS-ES Discrete is another Extended Surround mode that adds a surround back
channel, but this information is encoded discretely on the disc and is not derived from
information contained in the surround channels.
• DTS-ES Discrete
DTS Stereo Delivers a two-channel downmix of DTS Digital materials or presents a matrix-encoded
surround presentation.
• DTS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1, 3/1/.0 or .1, 2/2/.0 or .1,
3/2/.0 or .1
• DTS 96/24
• DTS-ES Matrix
• DTS-ES Discrete
Table A8 – Surround Modes – continued

Harman Kardon AVR 1510S Specifications

General

Receiver type	Surround
Input sensitivity	250 mV
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	38 dB
Total Harmonic Distortion (THD)	0.1 %
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Digital audio optical in	1
Speakers connectivity type	Binding post
Ethernet LAN	-
AM band range	522 - 1.62 kHz
FM band range	87.5 - 108 MHz
Internet radio	Yes
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	DTS, Dolby Digital, Dolby Pro Logic II
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Cables included	AC

Weight and Dimensions

Depth	300 mm
Width	440 mm
Height	121 mm
Weight	4600 g