EasyManuals Logo

Harman Kardon AVR 1510S User Manual

Harman Kardon AVR 1510S
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
AVR
ENGLISH
Specifications
Specifications
Audio Section
Stereo power: 75W per channel, two channels driven @
6/8 ohms, 1kHz, <0.9% THD
Multichannel power: 75W per channel, two channels driven @
6/8 ohms, 1kHz, <0.9% THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Surround system adjacent channel
separation:
Dolby Pro Logic/DPLII: 40dB
Dolby Digital: 55dB
DTS: 55dB
Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)
High instantaneous current
capability (HCC):
±28 amps
Transient intermodulation
distortion (TIM):
Unmeasurable
Slew rate: 40V/μsec
FM Tuner Section
Frequency range: 87.5 – 108.0MHz
Usable sensitivity IHF: 1.3µV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB
Image rejection: 80dB
IF rejection: 80dB
AM Tuner Section
Frequency range: 520 – 1710kHz (AVR 1510S)
522 – 1620kHz (AVR 151S)
Signal-to-noise ratio: 38dB
Usable sensitivity (loop):
500µV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB
Video Section
Television format: NTSC (AVR 1510S);
PAL (AVR 151S)
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite
video):
10Hz – 8MHz (–3dB)
HDMI: HDMI 1.4
General Specifications
Power requirement: 120V AC/60Hz (AVR 1510S);
220V – 240V AC/50Hz – 60Hz (AVR 151S)
Power consumption:
<0.5W (standby);
410W maximum
Dimensions (W x H x D):
17-5/16" x 4-3/4" x 11-13/16"
(440mm x 121mm x 300mm)
Weight
10 lb (4.6kg)
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman Kardon AVR 1510S and is the answer not in the manual?

Harman Kardon AVR 1510S Specifications

General IconGeneral
Receiver typeSurround
Input sensitivity250 mV
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)38 dB
Total Harmonic Distortion (THD)0.1 %
Power output per channel (20-20KHz@8 Ohm)75 W
HDMI in4
Digital audio optical in1
Speakers connectivity typeBinding post
Ethernet LAN-
AM band range522 - 1.62 kHz
FM band range87.5 - 108 MHz
Internet radioYes
Supported radio bandsAM, FM
Optical drive includedNo
Product colorBlack
Audio decodersDTS, Dolby Digital, Dolby Pro Logic II
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width440 mm
Height121 mm
Weight4600 g

Related product manuals