Harman Kardon AVR 1510S User Manual

14
AVR
Making Connections
Connect Your TV or Video Display
If your TV has an HDMI connector and you have HDMI source devices: Use an HDMI
cable (not included) to connect it to the AVR’s HDMI Out connector. This will provide the
best possible picture quality.
TV
Conector de saída
AVR HDMI
Cabo HDMI
(não fornecido)
If your TV does not have an HDMI connector or if your TV does have an HDMI
connector but you are connecting some source devices with only composite video
connectors: Use a composite video cable (not included) to connect the AVR’s Composite
Monitor Out connector to your TV’s composite video connector.
TV
AVR Composite
Monitor Out Connector
Composite Video Cable
(not supplied)
NOTE: If you use only the composite video connection to your TV, you will not be able to
view the AVR’s on-screen menus.

Harman Kardon AVR 1510S Specifications

General

Receiver type	Surround
Input sensitivity	250 mV
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	38 dB
Total Harmonic Distortion (THD)	0.1 %
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Digital audio optical in	1
Speakers connectivity type	Binding post
Ethernet LAN	-
AM band range	522 - 1.62 kHz
FM band range	87.5 - 108 MHz
Internet radio	Yes
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	DTS, Dolby Digital, Dolby Pro Logic II
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Cables included	AC

Weight and Dimensions

Depth	300 mm
Width	440 mm
Height	121 mm
Weight	4600 g