Harman Soundcraft Vi1000 - Page 101

Vi1000 USER MANUAL
10.2 10.2: MONITORING > SETUP
10.2: MONITORING > SETUP
Monitoring
delay Range Low Range High
Adjust the monitoring
delay.
The monitor delay allows the headphones and/or monitor
speakers to be time-aligned to the output from the main
PA system, when working at a distance from the PA
speakers. The delay applies to all three monitor outputs
(Monitor A, B, and Headphones).
Zero Delay
2sec / 666 m /
2253 ft
Monitoring
delay ON
Activate/Deactivate the
monitoring delay.
MON A
out patch C
Allows the output patch
point to be chosen for
Monitor A, Centre output
Default patch is local line out ‘MNTR-A, C’
MON A out
patch LR
Allows the output patch
points to be chosen
for Monitor A, Left and
Right outputs
Default patch is local line outs ‘MNTR-A, L & R’
MON B patch
LR
Allows the output patch
points to be chosen
for Monitor B, Left and
Right outputs.
Default patch is local line outs ‘MNTR-B, L & R’