5.5 5.5 Operations Overview > Buttons
Vi1000 USER MANUAL
5.5 Operations Overview > Buttons
Input Channel VISTONICS Group
The input channel VISTONICS control buttons provide convenient ways of assigning bus
master functions to the input channel VST encoders, such as selections for individual bus ‘tap’
points, and getting the input bus contribution shown on the VST screen to follow the master
bus selection in the Master Bay.
For more information, see the Inputs reference chapter 6.
Output Vistonics Group
These buttons provide control over the VST section functionality of the Master Bay vistonics
screens. For example, the [PAGE A] and [PAGE B] buttons switch the encoder section of
the screen between busses 1-16 and 17-24. For More information, see Outputs Reference
chapter 7.
Encoder Mode Buttons
These buttons assign various functions to the input channel strip encoders. For more informa-
tion see the Inputs reference chapter 6.
Mute & VCA Groups
Control and assign the four mute groups and available 16 VCAs. For more information see the
Mute & VCA Groups reference chapter 9.
To Next Page
Loading...
