Harman Soundcraft Vi1000 - Bus Configuration and Assignment

Vi1000 USER MANUAL
7.2 7.2: OUTPUTS > BUS CONFIGURATION
7.2: OUTPUTS > BUS CONFIGURATION
To congure the console busses and map the bus masters to the console input channel strips, you simply assign a
bank of eight bus masters by touching the relevant metering group in the Master Bay touch screen. You then patch
physical outputs and name the busses by touching the Panning/Insert processing block in the touchscreen area and
presing the {BUS OUT} and {OUT LABEL} buttons in the VST area.
Outputs: Bus Conguration