Harman Soundcraft Vi1000 - 4.1 Hardware - Local I;O; Local I;O and Main Slots

Vi1000 USER MANUAL
4.1 4.1: Hardware > Local I/O
4.1: Hardware > Local I/O
Most of the Vi1000 local I/O is located on the rear panel of the console. The main I/O slots have a variety of possible
congurations, inlcuding digital (AES) and analogue input and output cards. However, the monitor / masters output
section cannot be changed - this contains the xed-routing Monitor A and Monitor B outputs, plus the master LCR
analogue outputs.
There are also user-congurable D21m I/O expansion slots that can accept any of the available Soundcraft D21m
compatible I/O cards. Options for these include MADI (Optical or CAT 5), ADAT, Blu Link, Aviom, Ethersound, Co-
branet, Line in, line out, AES/EBU, and mic in. The D21m IO Expansion slots are also used for connecting a Sound-
craft Stagebox.
Fixed I/O on the rear panel includes all data/digital connections such as MIDI, USB, HiQnet, AES I/O, DANTE, MADI,
Word Clock, and DVI Out, plus the dual redundant power supply connections.
The control surface of the console features two additional USB sockets and a talkback microphone XLR connection.
Hardware - Local I/O
Main I/O Slots
The main local I/O slots.
Conguration options for the two main I/O slots are: 16
mic in /16 line outs (factory default); 32 mic in / 0 line
outs; 0 mic in / 32 line outs; 16 in 16 out AES (mic in and
line out cards replaced by a 16 in 16 out AES module).