5.5 5.5 Operations Overview > Buttons
Vi1000 USER MANUAL
5.5 Operations Overview > Buttons
[SETUP]
Buttons Field / Group: Active
[SETUP] buttons open
the relevant setup
screen in the Master
Bay Vistonics screen.
While a setup screen is active, pressing the [SETUP]
button again will close that setup screen. For more
information see the chapter relevant to each [SETUP]
button.
Show Setup
screen
[SOLO/SEL]
Buttons Field / Group: Inactive Active
Solo or select a chan-
nel.
The [SOLO/SEL] keys operate in two modes. The default
function is to enable the SOLO path from its channel or
bus to the monitoring system. However, if a touch-area
page is open, pressing a [SOLO/SEL] from another
channel (within its own bay of eight channels) moves
the touch-area page to this new channel. [SOLO/SEL]
buttons also perform other selection functions depending
on the console mode. These are described in the
relevant reference chapter.
Normal
Soloed/
Selected
[GANG] Buttons Field / Group: Inactive Active
Special Ganging
functionality.
For linking channels, processing blocks, and parameters,
for convenient control. See the Gang section in this oper-
ations overview chapter for more information.
Normal Gang Mode
[SOLO CLEAR]
Button Field / Group: Active
Clear any currently
active console Solos.
Clear
To Next Page
Loading...
