Harman Soundcraft Vi1000 - Talkback Setup

Vi1000 USER MANUAL
15.3 15.3 TALKBACK & OSC > TB SETUP
15.3 TALKBACK & OSC > TB SETUP
15.3: Talkback Setup & Use
Talkback
Source Active Inactive
Select the Talkback
source / input.
If (NONE) is selected the console’s TB mic XLR
is automatically selected. The button opens up an
assignment selection page in the master touch screen
area where you can select any available microphone
input.
Close source
selection
screen
Open source
selection
screen
Talkback
External
Output Active Inactive
Assign the Talkback
output directly to
individual physical
console outputs.
Opens an output assignment page with all available
physical outputs.
Close
patching
screen
Open
patching
screen
Talkback Pre-
set Assignment Active Inactive
Assign a selection of
output busses to the
selected Talback preset
Close
assignment
screen
Open
assignment
screen
Talkback is a communications path between the console operators and the artists, crew, and other personnel.
There is a direct-plug mic input (XLR) on the console surface with the TALKBACK/OSC group of controls. This and
other talkback routing and conguration options are detailed below.