Vi1000 USER MANUAL
4.1 4.1: Hardware > Local I/O
4.1: Hardware > Local I/O
PSU / Power
Sockets
There are two mains
inputs for seamless
redundancy for those
that require it. The IEC
inlets can accept AC
inputs from 100V
to 240V.
Either socket can be used for a single supply. if both are
used then one is a backup. The two sockets are labelled
PSU1 and PSU2, corresponding to indicator lights on the
Menu-System-Local page. The colour of this indicator,
and the power button on front panel of the console,
indicates the state of these PSUs: RED if only one of
them is on, and GREEN if both are on.
Power
Switches Inactive Active
There is a power
switch for each of the
power supply inputs.
Both need to be on for
the dual redundancy
switching to be
effective.
Power off Power on
DVI (Digital
Video) output
For future use.
MIDI In / Out
5-Pin DIN connectors
for MIDI compatible
equipment only.
USB
The console USB
connections ca be
used for connecting an
external keyboard or for
USB storage devices.
HiQnet
Interface
XLR-housed EtherCon
connector for HiQnet
network connection.
For details on HiQnet setup, please refer to reference
chapter 18.
To Next Page
Loading...
