Harman Soundcraft Vi1000 - Page 103

Vi1000 USER MANUAL
10.2.1 10.2.1: MONITORING > MON SETUP
10.2.1: MONITORING > MON SETUP
Outputs Solo
Assign
Assign individual Output
Solos to Monitor A,
B, and Headphones
outputs.
When selected, an output assignment screen is
displayed in the master touch screen area. You can
select individual output buss solos for the specic
monitor output. This is useful for stage monitoring
applications where the solos of in-ear monitor mixes
could be programmed to appear only on Monitor B for
example, which could have an in-ear headphone system
connected to it. In this example, conventional wedge
monitor mixes could be programmed to appear only
on Monitor A when soloed, where Monitor A could be
connected to a wedge speaker system.
DIM Level Range Low Range High
Adjust the monitoring
DIM Level between 0
and –innity.
The DIM function is only activated if the Return Talkback
function is activated via the GPIO facility.
-innty 0dB