Harman Soundcraft Vi1000 - Page 126

Vi1000 USER MANUAL
14.3.1 14.3.1: CUES > CUE NUMBER/TIMECODE
14.3.1: CUES > CUE NUMBER/TIMECODE
14.3.1: Cues: Number and Timecode
Timecode On/
Off
Activate MIDI timecode-
based recall for this cue.
Copy Timecode
Copy the current
incoming MIDI timecode
to the cue's recall
TIMECODE elds.
Set Timecode Range Low Range High
Manually set or adjust
the MIDI timecode
at which the cue is
recalled.
Encoders adjust H (Hours), M (Minutes), S (Seconds),
and F (Frames).
0 time
dependant on
eld
Selecting a cue number in the cue list gives access to that cue’s basic settings, plus MIDI timecode recall event set-
tings and the GO TO CUE ‘local’ sequencing function.