Harman Soundcraft Vi1000 - Page 42

6.1 6.1: INPUT CHANNEL > FADER PAGES
Vi1000 USER MANUAL
6.1: INPUT CHANNEL > FADER PAGES
Navigating The Input Channels - Input Fader Pages
This section is used for navigating Fader Pages (or layers). There are ve main layers of 8 input channel strips,
and a further ve user-denable layers available.
In addition, you can touch the input or bus meter elds in the Master Bay Vistonics to remap those input or bus
channels to the input bay.
You can extend the size of input layers by mapping inputs to the Output Fader pages, and then setting up an
automatic trigger so that pressing an Input fader page button also activates a predened output page at the
same time.