Vi1000 USER MANUAL
7.4 7.4: OUTPUTS > GRAPHIC EQ
7.4: OUTPUTS > GRAPHIC EQ
The console has a total of 27 high-quality BSS Graphic Equalisers (GEQ) - one for each of the 24 assignable Busses,
and one for each of the LCR Master outputs. The GEQs are all 30-Band EQs with an adjustable bandwdith control.
To access a GEQ, simply select a GEQ processing block from an output’s touch-screen parameter display.
Bus parameter displays can be accessed either by touching a bus meter block on the master screen to assign 8 bus-
ses to the Input Bay and selecting the GEQ block from the corresponding channel’s touch screen area, or by selecting
a bus [SOLO/SEL] button while the Master Bay Vistonics button assign is set to Solo/Select. For more information see
the Bus Output reference.
When a GEQ is selected, Bandwidth, Flatten, and In controls are mapped to the right-most VST controls, and the
Graphic EQ bands are mapped to the console faders. The GEQ bands are mapped 8 at a time to the Master bay
faders, scrollable with the Output Fader Page buttons [A] to [E].
Graphic Equalisers (GEQ)
To Next Page
Loading...
