Harman Soundcraft Vi1000 - Monitoring Setup and Source Assignment

Vi1000 USER MANUAL
10.2 10.2: MONITORING > SETUP
10.2: MONITORING > SETUP
All monitoring source assignments for MONITOR A, B, and HP are assigned in the monitoring setup page, as well as
monitoring delay.
Monitoring Setup
Monitoring
Input Solo
Source
Choose either input
channel PFL, AFL, or
'AUTO' as the Input
Solo source.
The AUTO option works by selecting PFL when only
one solo is active and AFL when more than one solo is
active.
Output solo
source
Choose either output
buss PFL or AFL as the
Output Solo Source.