EasyManua.ls Logo

Harmony COMMANDER - Installing Child Restraint in Harness Mode: UAS or Vehicle Seat Belt

Harmony COMMANDER
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
3. Thread the crotch strap through
the plasc base to the desired slot
posion ❹.
! ENSURE that the strap is
COMPLETELY in the desired slot
and the harness strap is NOT
twisted. Gently pull upwards to
ensure it is rmly in place.
! ENSURE that the buckle is facing FORWARD ❺.
WARNING!
!
FAILURE TO REINSTALL THE CROTCH STRAP
CORRECTLY COULD RESULT IN SERIOUS INJURY OR
DEATH.
REMEMBER to check the shoulder
straps and crotch strap posion
frequently and move them to the
next posion when necessary. The
harness straps MUST be in the height
posion EVEN WITH or JUST ABOVE
the shoulders, and the crotch strap
MUST be in the slot at or immediately in front of your
child. The shoulder pads and crotch pads are oponal
and are not a safety feature.
T IP: For children over 18.1 kg (40 pounds). requiring
more harness length, remove body insert cushion
(if applicable).

Table of Contents

Related product manuals