Harmony COMMANDER - Securing Child in Child Restraint

32
SECURING CHILD IN CHILD RESTRAINT
• Adjust harness height (see
"Preparing child restraint for use").
1. Open harness chest clip by
pressing buon while pulling
apart the two-piece chest clip ❶.
2. To loosen the harness strap:
Push the up-front harness metal
adjustment buon at the front
of the seat just ABOVE the
adjustment strap (under the
fabric) ❷ and simultaneously pull
the chest strap towards you ❸.
3. Unbuckle harness straps by
pressing on the RED buckle
release buon and by pulling the
buckle clips out ❹. Move harness
straps to the side.
TIP: Insert buckle clips through the
loops located on both sides of
the seat as shown ❺.
4. Place child in child restraint with
child’s back at against back of
the backrest.
5. Adjust headrest height so that the
boom of the headrest is EVEN
with or JUST ABOVE the top of
the child’s shoulders.





