Harmony COMMANDER - Installing Child Restraint in Harness Mode: UAS or Vehicle Seat Belt; UAS (Universal Anchorage System)

25
If your vehicle is equipped with UAS, the
vehicle UAS anchorage points may be visible
at the seat crease. If not visible, they may be
marked with this symbol.
Check your vehicle owner’s manual for your vehicle’s

requirements for use with a child restraint.
! Use vehicle belt (NOT UAS connectors) for installaons
with children weighing more than 22.68 kg (50
pounds).

Top Tether
anchors points
Vehicle
seat crease
UAS
anchor
points
INSTALLING CHILD RESTRAINT IN HARNESS MODE:
UAS OR VEHICLE SEAT BELT
You can install the child restraint using EITHER the UAS
or vehicle seat belt.
UAS: The lower Universal Anchorage System (UAS) is
used for installing the child restraint WITHOUT using
the vehicle seat belts.
! The UAS can ONLY be used if your vehicle has the
UAS anchors installed and designated UAS seang
posions. Check your vehicle owner’s manual to see
which seang posions may be equipped with UAS.
Vehicle Seat Belts: If UAS is not an opon, you MUST
use the vehicle’s lap-and-shoulder belt to install the
child restraint in your vehicle.