EasyManua.ls Logo

Harmony COMMANDER - Removing;Installing Harness; (Without Internal Harness); Using Child Restraint in Booster Mode

Harmony COMMANDER
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
3. Unbuckle harness by pressing on RED buckle release
buon.
USING CHILD RESTRAINT IN BOOSTER MODE

REMOVING/INSTALLING HARNESS
1. Open chest clip and harness
buckle.
2. Face the rear of the child restraint
and remove the harness straps
from the splier plate ❶.
3. Adjust headrest to its maximum
height and pull shoulder straps
out of their respecve slots in the
backrest ❷.
4. Lie child restraint on its side
and nd the metal locking plate
for each harness strap on the
underside of the base of the child
restraint. Turn each metal plate
so that it can slide up and out
through the plasc seat base.
5. Repeat procedure for crotch strap
removal.
6. Store complete harness system
and crotch strap for future use.
7. Pull the up-front harness
adjustment strap as far as it will
go. This will lock the splier plate into the base of the
seat ❸.
8. Roll strap ghtly, secure roll with an elasc band and
store rolled strap under the fabric seat cover in the
opening of the up-front adjuster.
To reinstall, repeat these steps in reverse order.

Table of Contents

Related product manuals