10
use. place heavy objects on top of the child
restraint while in storage.
. Contact with these parts can injure your child.
touch the surface of any metal or plasc
parts before pung your child in the child restraint.
Cover the child restraint with a towel or blanket when
the vehicle is parked in direct sunlight.
use this child restraint with unsafe vehicle seat
belts listed in secon “Unsafe vehicle seat belt systems”
(pg. 23) of this manual. Your child would be seriously
injured in the event of a crash.
use this child restraint if it can’t be properly
installed. It is possible that your vehicle has no suitable
seang posion for this child restraint due to seat belt
type, airbag system and/or lack of locaon of a tether
strap anchor. Read and follow these instrucons, and
your vehicle owner’s manual carefully.
aach two LATCH lower connectors to the
same anchor point.
This child restraint system conforms to Federal Motor
Vehicle Safety Standards, secon 213 and 213.2.
: This child
restraint conforms to Federal Motor Vehicle Safety
Standards 213 and is cered for use in passenger
motor vehicles and aircra.
: This child
restraint (booster seat) conforms to Federal Motor
To Next Page
Loading...
