1. Place booster seat rmly against the back of a
forward-facing vehicle seat. The vehicle seat
be equipped with a lap-and-shoulder belt. Booster
must be level, stable and not rock side-to-side
(see “Choosing an appropriate vehicle seat locaon”,
pg. 12).
2. Place child in the booster seat with child’s back at
against the back of the booster seat.
3. Adjust headrest height so that the boom of the
headrest is even with the top of the child’s shoulders.
4. Thread the shoulder belt poron of the 3-point lap-
and-shoulder belt through the headrest shoulder
belt guide ❶ and ensure that the shoulder belt lies
across child’s shoulder and chest, and across
child’s face or neck.
: To avoid possible entanglement and
choking with your vehicle’s shoulder belts, Harmony
Juvenile Products recommends that the following
precauons are taken when installing your booster
seat:
1. Pull the shoulder poron of the vehicle seat belt all
the way out unl the retractor locks.
2. let the vehicle seat belt retract unl it is snug
against your child.
3. that the belts do not press on the child’s esh
or push the child’s body into an unnatural posion.
4. Do the same for all unused vehicle seat belts.
Teach your child that vehicle seat belts are not toys and
should be played with, regardless of whether
the car is in moon or not.
be aware of what your children are doing in
the back seat.
41
To Next Page
Loading...
