1. Open harness chest clip by pressing in pin clips while
pulling apart the two piece chest clip.
2. Loosen the harness system by pressing on the
up-front metal harness adjuster, and simultaneously
pulling the shoulder straps towards you.
3. Unbuckle harness by pressing on buckle release
buon.
1. Open chest clip and harness buckle.
2. Face the rear of the child restraint and remove the
harness straps from the splier plate ❶.
3. Pull shoulder straps out of their respecve slots in the
backrest ❷.
4. Lie child restraint on its side and nd the metal
locking plate for each harness strap on the underside
of the base of the child restraint. Place a screwdriver
under the loop of the strap and pry up to unlock
the metal locking plate from the plasc base ❸.
Turn each metal plate so that it
can slide up and out through the
plasc seat base.
5. Store complete harness system for
future use.
6. Store crotch buckle under fabric
seat pad in the indentaon in the
plasc seat base ❹.
❷
❸
❶
❹
37
To Next Page
Loading...
