See “Assembling/Unassembling child restraint”
(pg. 21) for instrucons for removing the backrest. Once
backrest is removed, turn recline knob clockwise unl
end is reached to retract the base plate on the boom
of the seat.
1. Place the booster seat rmly against the back of a
forward-facing vehicle seat in a posion equipped
with a vehicle lap-and-shoulder belt and headrest.
!
Once the lap and shoulder porons
of the seat belt are properly posioned and the
buckle is aached,
❶
❷
❸
5. Thread both sides of the lap belt
and the lower end of the shoulder
belt armrests ❷
and ensure that the lap belt is snug
across child’s hips just touching
their thighs and is across
their stomach.
6. Buckle vehicle seat belt into place
❸ and ensure it is secure by gently pulling on it.
: To avoid possible entanglement hazard,
see “Entaglement with vehicle belt”, pg. 41.
42
To Next Page
Loading...
