Fabric covers can be removed once the harness
system has been removed (see “Removing/Installing
harness”, pg. 37 - #1-3).
HEADREST:
1. Gently slide fabric downwards o the top of the
headrest.
2. Unhook the elasc loops from each headrest shoulder
belt guide opening on the boom of the headrest.
BACKREST:
1. Undo the fabric hook-and-loop
fastener tabs (x2) ❶ along the
boom sides of the backrest (where
the backrest meets the base).
2. Gently slide fabric cover o the
backrest.
3. Remove EPE foam from backrest fabric.
BASE:
1. Undo the fabric hook-and-loop fastener tabs (x2) ❷
from the outside of each side of the seat base (where
armrests meet backrest).
2. Gently slide the fabric cover o the plasc base from
the back of the child restraint towards the front of the
seat. Make sure that recline knob does not get caught
on fabric as you remove seat pad.
To reinstall fabric pads, repeat previous steps in reverse
order.
For ease of fabric pad installaons, turn recline knob
counterclockwise to open gap at base of backrest to
facilitate passing the hook and loop tabs through
the gap to secure.
❷
❶
45
To Next Page
Loading...
