Booster must be level, stable and not rock side-
to-side (see “Choosing an appropriate vehicle seat
locaon”, pg. 12).
2. Have your child sit on the booster seat with their back
at against the vehicle seat.
3. Thread both sides of the lap belt and
the lower end of the shoulder belt
armrests as indicated
and ensure that the lap belt is snug
across child’s hips just touching
their thighs and is across their
stomach.
4. Buckle vehicle seat belt into place and ensure it is
secure by gently pulling on it.
: To avoid possible entanglement hazard,
see “Entaglement with vehicle belt”, pg. 41.
1. Locate the shoulder belt guide strap and screw in the
storage pouch.
2. Using a Phillips screwdriver,
aach belt guide strap to booster
seat base by screwing into the
pre-drilled hole in the back of the
seat base.
Before ghtening screw, make sure belt strap is
poinng upwards and that the belt guide opening
is facing forward. overghten screw.
43
To Next Page
Loading...
