use a vehicle seat belt system where the lap
and shoulder belts have independent retractors.
use a vehicle seat belt system with top or
boom anchorage points aached to the door in any
way.
use lap belts whose anchor points are forward
of the seat crease.
A locking clip is used to prevent certain vehicle
seat belts from loosening before a sudden stop
or crash. The locking clip can be used
on a vehicle lap-and-shoulder belt. A locking
clip will not x all types of vehicle seat belt
problems.
If your vehicle’s 3-point lap-and-shoulder seat belt is
equipped with an Emergency Locking Retractor (ELR)
that is converble to funcon as an Automac
Locking Retractor (ALR), then the locking clip be
used.
If you have any quesons about the specic type of seat
belt system in your vehicle and/or its operaon, consult
your vehicle owner’s manual.
• Remove the locking clip from mesh storage pocket on
restraint backrest (see “Parts list”, pg. 18).
• Follow the steps to properly secure vehicle lap-and-
24
To Next Page
Loading...
