Harmony DEFENDER 360 - Page 34

2. Thread the vehicle seat belt
through the belt slot opening and
out the other side. See illustraons
for proper roung path of Lap-
and-Shoulder Belt ❷ or Lap-Only
Belt ❸.
3. Buckle the vehicle seat belt. The
vehicle seat belt   be
twisted.
To engage vehicle seat belt retractor:
4. Pull out the full length of the seat
belt (unl you cannot pull out
any more slack). This locks the
retractor.
5. Tighten vehicle seat belt by placing
your knee on the seat base and by
using your full weight to push the
child restraint down ❹ as you
simultaneously release the extra
belt length unl seat belt is taught
and has no slack ❺.
6. The locked seat belt retractor will
not allow you to add any length to the belt unl you
unbuckle the seat belt.
For more informaon on how to ghten the belt for
your seat belt system, see your vehicle owner’s manual.
7. Secure the top of the child restraint using the Top
Tether strap (see secon “Using Top Tether”, pg. 25).
❷
❸
❺
❹
33