EasyManua.ls Logo

Harris InfoCaster R2100 - LAN Port Leds

Default Icon
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7Chapter 1 | Introduction
InfoCaster R2100 Hardware Installation Manual
LAN Port LEDs
Table 1-4 describes the status of the LAN LEDs. The left LED indicates the
network connection status. The right LED indicates the connection speed.
Front Speaker Out
(lime)
Connects the front speakers in a 4-channel, 6-channel,
or 8-channel configuration.
Mic In (pink) Connects a microphone.
Side Speaker Out
(grey)
Connects the side speakers in a 8-channel
configuration.
USB 1-6 Connect up to six Universal Serial Bus (USB) 2.0
devices.
External SATA 1-2 Connect up to two external SATA hard disk drives. To
configure a RAID0, RAID1, or JBOD set, connect
external serial ATA hard disk drives to both SATA
ports 1 and 2.
Optical S/PDIF Out Audio output via an optical S/PDIF cable.
Table 1-4. LAN LED Descriptions
Link LED Status
(left side)
Description
Speed LED Status
(right side)
Description
Off No Link Off 10 Mbps
Amber Linked Amber 100 Mbps
Blink Data Activity Green 1 Gbps
Table 1-3. PC Ports Descriptions (Continued)
Port Description

Table of Contents