60 Chapter 4 | Specifications
InfoCaster R2100 Hardware Installation Manual
Temperature Probe Specifications
Table 4-2 details the temperature probe specifications.
System Recovery • Bootable recovery DVD to return system to factory
configuration
Operating
Tempe r a ture
• 40° to 95° F (5° to 35° C)
Relative Humidity • 5 to 95 % (non condensing)
Table 4-1. System Technical Specifications (Continued)
Item Specification
Table 4-2. Temperature Probe Specifications
Item Specification
Probe measurement range -67º F to +257º F (-55º C to +125º C)
Precision 32.9º F (0.5º C)
Accuracy 32.9º F over 32º to +158º F (0.5º C over 0º C
to +70º C), 30.2º F (±1º C) over remainder of
temperature range
Maximum measurement rate one reading every second
Probe dimensions 8” (20.3 cm) long, ¼” (6 mm) diameter,
stainless steel probe with 4 ft (1.2 m) long,
high-temp silicone rubber cable
Housing dimensions 3.1” (8 cm) x 1.6” (4 cm) x 0.8” (2 cm)
Housing material injection molded ABS thermoplastic
Housing color light gray
Sensor type semiconductor
Communications connector 8 position modular jack, (accepts 8 position
plug RJ-45)
Power source Port-powered (RTS and DTR, both asserted)
or via External DC power connector
Power supply current drain < 10 mA
External DC power
connector
2.1 mm power jack, automatic polarity
correction and over-voltage protection
External power supply
voltage
6.0 to 14.0 VDC
To Next Page
Loading...