______________________________________________HARRIS
888-9058-001
WARNING: Disconnect and lockout AC primary power prior to servicing
114
Figure 4-9 Drive Tab, Control Button
This screen duplicates the control and status indicators of the exciter switcher. One
additional button allows muting the RF drive by forcing the AGC output to zero.
Figure 4-10 Drive Tab, Service
Button
This screen allows the maintenance personnel to configure the number of exciters and
the number of AGC units. Exciter power display can be calibrated to match the power
meter on the Exciter front panel. Push “Cabinet Drive Power” button for next screen.
Cabinet nominal power can be entered and cabinet actual drive power can be calibrated.
To Next Page
Loading...
