______________________________________________HARRIS
888-9058-001
WARNING: Disconnect and lockout AC primary power prior to servicing
68
Hardware:
• Pentium III 400 MHz (Intel PIII+-compatible, 1GHz+ recommended)
• 128MB RAM (256MB or more recommended)
• 75MB of available hard drive space
• Mouse (mouse-wheel recommended)
• 28.8k modem (56k modem recommended or high speed TCP/IP network if
available)
• SVGA monitor running in at least 800x600 resolution
• SVGA Video card (hardware acceleration with Direct3D driver support
recommended)
Operating System:
• Windows 98 (1st edition) or newer
• Windows ME
• Windows 2000 with Service Pack 2 or newer
• Windows XP
Web Browser:
• Internet Explorer 5.5 or higher with default security permissions
• Netscape 7.0 or higher
NOTE:
Microsoft DirectX 7.0 or later is highly recommended (comes pre-installed on
Windows 2000 and Windows XP).
3.8 Setup
The information contained in this section is intended to explain the following:
• Connection of all required cables between the Platinum-i eCDi™ and the
transmitter and exciters and to the station LAN or WAN.
• Setup and configuration of the eCDi™ for connection to the station LAN or
WAN to provide Web GUI access.
CAUTION:
OVERALL NETWORK SECURITY IS THE RESPONSIBILITY OF THE CUSTOMER.
INTEGRATION OF THE UNIT SHOULD BE BEHIND THE CUSTOMERS FIREWALL
WITH ACCESS THROUGH A VPN (VIRTUAL PRIVATE NETWORK).
To Next Page
Loading...
