______________________________________________HARRIS
888-9058-001
WARNING: Disconnect and lockout AC primary power prior to servicing
13
Section 1 1
Platinum-i Series Analog
Transmitter Introduction
______________________________________________________________________
1.1 Introduction
This manual is desrcibes the Harris Analog Platinum-i
TM
series of solid state VHF
transmitters which include the following models with their peak sync power ratings.
Larger models are available by request. Each model is rated for 10% aural.
MODEL POWER MODEL POWER
HT15HS/LS 15 KW HT10HSP 10 KW
HT11LSP 11 KW
HT30HS/LS 30 KW HT20HSP 20 KW
HT22LSP 22 KW
HT45HS/LS 45 KW HT30HSP 30 KW
HT33LSP 33 KW
HT60HS/LS 60 KW HT40HSP 40 KW
HT44LSP 44 KW
1.1.1 Transmitter Configurations
The Platinum-i series contains a separate intelligent control cabinet that can be used in
multiple Platinum Analog transmitter configurations.
There are 2 basic PA cabinet configurations: Standard and Parallel Path. In Standard
configuration; a separate PA cabinet houses vision Driver(s), vision Driver PAs, sound
Driver(s), and the sound PAs. This cabinet is often referred to as the Aural/Driver
Cabinet or Sound/Driver Cabinet. In addition to the Aural/Driver Cabinet are 15kW
vision PA building block cabinets. A 30kW system would include 1 Aural/Driver Cabinet
plus two 15kW vision PA cabinets. In Parallel Path configuration there is no separate
Aural/Driver cabinet. Instead, each PA Cabinet contains vision and sound Drivers, vision
Driver PAs plus sound PAs resulting in 10kW building block cabinets. Thus a 20kW
system would have 2 PA cabinets plus the Control Cabinet.
To Next Page
Loading...
