4 VCA / VDA / VEA6800+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
• Looping and internal terminating selectable with dual slot back
module, internal terminating with single slot back module with
FR6802+X(F) frames; looping or internal terminating selectable
with FR6802+DM(F) frames (see Figure 2-10 on page 22 for
instructions on setting this jumper)
• ± 3 dB gain adjustable range
• > 50 MHz bandwidth
• Continuous cable equalizing up to 984 ft (300 m) Belden 8281
cable, or equivalent
• Gain and EQ setting components are installed on a removable
submodule; in the event of failure on the DA module, a replacement
DA module can be quickly inserted with the original submodule to
keep the previous setting
• Optional equalizers for different cable types
• Module presence reporting via +Pilot Lite control system
• Hot swappable
To Next Page
Loading...
