Hasler WJ20 - Clearing PO Lockout

HASLER Adding Postage Section 7
06/2003 WJ20 Page 7 - 5
< FUNDS LOCKOUT >
< CLEAR LOCKOUT >
CONNECTING
PLEASE WAIT
AUDIT
DONE
TRANSACTING
PLEASE WAIT
Clearing A PO Lockout
USPS regulations require that your meter must be set at least
once every three months. The meter has an internal timer
that tracks your reset activity. After three months without
adding postage, a PO LOCKOUT message is displayed and
postage printing is disabled.
To clear the lockout:
Press and the following
display will appear.
Press to confirm and the following displays will be
observed:
Press twice to return to Ready mode.
When the CLEAR LOCKOUT transaction is completed,
postage printing is enabled for another 3 months.