HASLER Print Quality Section 9
06/2003 WJ20 Page 9 - 3
< CARTRIDGE >
CARTRIDGE
< REMOVE >
To Replace The Ink Cartridge
The same process is used to install a new ink cartridge
except there is no "old" ink cartridge to remove.
Notes:
• The ink charging process may take a short while to
complete, during this time the machine may produce
some mechanical sounds, this is normal.
• Once installed, do not open the blue latch again until you
need to fit a new cartridge.
• If the ink cartridge is not installed properly the machine will
not work.
From Ready mode, press
and scroll (< >) to the
Cartridge display:
Press to confirm.
Next, scroll (< >) to Remove:
Continued on the next page.
To Next Page
Loading...