HASLER Setup Mode Section 11
Page 11 - 6 WJ20 06/2003
< SETUP >
< TIMEOUT (MINS) >
5
TIMEOUT (MINS)
0
Ready $0.00
12/20/02
TIMEOUT (MINS)
10
Time Out (Sleep Mode) Setting
Time Out (Mins) is a security setting that determines the
number of minutes the meter will remain in the Ready mode
before it automatically goes into Locked mode.
Press and scroll (< >) to
SETUP:
Press , the first Set Up option is displayed.
Scroll (< >) to the Time option and press . The current
Timeout is displayed.
To change the Timeout,
press .
Select new Time. Example: 10
minutes.
Press
If value incorrect press and
start again.
If value correct press to confirm.
To return to Ready Mode, press or scroll (< >) to the
next SETUP mode to change.
To Next Page
Loading...