HASLER Cautions & FCC
FCC - 2 WJ20 06/2003
Modem Approval Requirements
This equipment contains a modem which has been approved
for connection to analog public switched telephone networks.
However, due to differences between individual telephone
networks provided in different areas, the approval does not, of
itself, give an unconditional assurance of successful
operation on every network termination point.
In the event of problems, you should contact your equipment
supplier in the first instance.
Installation Safety
The power plug on this equipment is intended to serve as the
device for isolation of the electrical supply. The equipment
should be installed in close proximity to an easily accessible
grounded power supply and analog telephone socket.
WARNING: FOR SAFETY THIS EQUIPMENT MUST BE
GROUNDED
WARNING: DO NOT UNDER ANY CIRCUMSTANCES
ATTEMPT TO REMOVE THE POWER SUPPLY OR
METER COVERS. THERE ARE NO OPERATOR
SERVICEABLE PARTS THEREUNDER.
To Next Page
Loading...