EasyManua.ls Logo

HATTAT A90 - Grease; Maintenance Schedule

Default Icon
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
7.2.1. Grease
Always use the following greases in POL-MOT
tractors. Each point requires it own type of grease.
Universal grease
Lithium based universal grease. Is suitable for
greasing all heavy machines.
− 30° ... +130°C
Universal grease of high quality, lithium based
grease for vehicle use. It is recommended for
greasing wheel bearings, chassis water pumps,
caterpillar rollers etc. The grease is adhesive,
protects against corrosion and resists water and
varying temperatures. Temperature range is
− 30° ... +130°C.
Calcium Grease LF
Is suitable for greasing all heavy machines. Long
fibre grease. Color red.
− 20° ... +60°C
Calcium LF is of long fibre, high quality and calcium
based universal grease for vehicle use. It is
recommended for greasing chassis, water pumps,
pins etc.The grease is adhesive, protects against
corrosion and resists water and varying
temperatures. Temperature range is − 20°.+60°C.
Moly Grease
Is suitable for greasing all heavy machines.
Lithium based universal grease.
30° ... +130°C
Universal grease of high quality, lithium based
grease for vehicle use. It is recommended for
greasing wheel bearings, chassis water pumps,
catepillar rollers etc. The grease is adhesive,
protects against corrosion and resists water and
varying temperatures.
Temperature range is − 3 ... +130°C.
Avoid repeating skin contact.
Protect nature and take care of empty packages
7.2.2. Maintenance schedule
PERIODICAL MAINTENANCE schedule
(according to operator’s manual) is recommended
for all tractors and specially for tractors, which have
more than 1000 running hours in one year. The
periodical maintenances from 50 hours onwards
can also be ordered from the authorized workshop.
In that case the periodical maintenance is carried
out by HATTAT authorized and trained service
personnel.
YEARLY MAINTENANCE schedule should be
carried out by an authorized workshop, but for
tractors which have under 1000 running hours in
one year the operator has to carry out the normal
service routines according to the following table (like
daily and weekly periodic maintenance).
Observe when doing the services that if the tractor
is equipped with extra equipment like towing device,
air condition, air pressure brakes etc. the periodical
maintenances and checks for them must be carried
out. The extra equipment which needs servicing is
given in the end of this manual in section "11".

Table of Contents

Other manuals for HATTAT A90

Related product manuals