Table of contents 3-4L43C, 3-4M43, 3-4M43Z
4
HATZ
Manual
8.2.2 Maintenance plan................................................................................................ 51
8.2.3 Checking the intake area of the combustion air .................................................. 53
8.2.4 Checking the cooling air area.............................................................................. 54
8.2.5 Change the engine oil. ........................................................................................ 55
8.2.6 Checking the poly v belt ...................................................................................... 57
8.2.7 Cleaning the cooling fan, cooling fins and oil cooler ........................................... 58
8.2.8 Checking the screw connections......................................................................... 62
8.2.9 Changing the fuel prefilter ................................................................................... 63
8.2.10 Maintaining the dry air filter ................................................................................. 65
8.2.11 Checking and cleaning the air filter cartridge ...................................................... 67
8.2.12 Checking and setting the tappet clearance ......................................................... 69
8.2.13 Changing the oil filter .......................................................................................... 72
8.2.14 Change the main fuel filter .................................................................................. 73
8.2.15 Renewing the poly v belt and checking the function of the switch-off unit .......... 76
8.2.16 Replacing the diesel particulate filter .................................................................. 79
8.2.17 Check the fuel evaporator (vaporizer) and clean if necessary. ........................... 81
8.2.18 Checking the exhaust gas back pressure sensor ............................................... 85
8.2.19 Resetting the maintenance interval indicator ...................................................... 86
9 Faults.................................................................................................................. 88
9.1 Trouble shooting ................................................................................................. 88
9.2 Flash code table for engine faults ....................................................................... 92
9.3 Flash code table for faults on the exhaust emission after-treatment system ...... 94
9.4 Flash code table for maintenance intervals......................................................... 98
10 Storage and disposal........................................................................................ 99
10.1 Storing the machine ............................................................................................ 99
10.2 Disposing of the machine.................................................................................. 101
11 Installation declaration ................................................................................... 102
To Next Page
Loading...
Need help?
General
