Hawk Gladiator series User Manual

22
Flow Chart
Gladiator Conductivity Switch Series
Advance Menu
CAL
Reset probe history log
(Yes / No)
Log will automatically reset when Cal Mounting is used in
QuickSet to cancel mounting influences and re-zero the % reading.
Default values/settings
in bold and underlined
Reset Log
No
CAL
1200
4800
9600
19200
38400
57600
Modbus
HART
Profibus DP
DeviceNet
1-255
Comms Type
Modbus
CAL
Device ID
1
Baud Rate
19200
CAL
CAL
CAL
CAL
CAL
Selection should not be changed
unless required hardware is
present.
CAL
Display Span: 0-100% change in displayed value will occur with the
selected change of raw internal units.
Changing of this parameter will change the value of the Switch Point
(Switch On and Switch Off) values.
Back Light
On
Display Span
3
CAL
Display Backlight
On/Off
CAL
CAL
From previous page
0. 0 - 3500 2. 0 - 2482 4. 0 - 1241
1. 0 - 3103 3. 0 - 1862 5. 0 - 621
(see part numbers - page 25-26)

Hawk Gladiator series Specifications

General

Brand	Hawk
Model	Gladiator series
Category	Switch
Language	English