Hawk Gladiator series - Remote Version

26
Part Numbering
Gladiator Conductivity Switch Series
Remote Version
RemoteAmplier
GSA Gladiator Amplifier (compatible with all Gladiator products), Modbus
Housing
S Standard polycarbonate electronics housing
Power Supply
B 12-30 VDC
C 36-60VDC
U 12-30VDC and 90-260VAC
Output Options
S Switch. 1 level relay, 1 failsafe relay
Approval
A22 Grp II Cat 3 GD T85°C IP67 Tamb -40°C to 70°C
GSA S U S
CS3200 Remote Gladiator Conductivity Probe
Housing
S Standard Powder Coated, Diecast with glass lid
C corrosion Resistant, Stainless Steel Housing
Type of Electrodes
S Single Point 1 Electrode Type for Metallic tanks
D Dual Point 2 Electrode Type for Metallic tanks
N Single Point 2 Electrode Type for Non-Metallic tanks (L1 must = L2)
Mounting
TN10 1” NPT Thread - Size only available with 1 electrode type for metallic tanks
TB10 1” BSP Thread - Size only available with 1 electrode type for metallic tanks
TN15 1.5” NPT Thread
TB15 1.5” BSP Thread
FA2 2” Flange ANSI (Class 150)
FD2 2” Flange DIN 50 (PN 40)
Approval Standard
X Not Required
A22 ATEX Grp II Cat 3 GD T85°C IP67 Tamb -40°C to 70°C
L1. Probe Length (Active Probe)
P30 300 mm (11.8”)
P50 500 mm (19.7”)
P100 1000 mm (39.4”)
L2. Probe Length (Reference Probe - equal to or longer than L1)
X Not required for 1 electrode type
P30 300 mm (11.8”)
P50 500 mm (19.7”)
P100 1000 mm (39.4”)
CS3200 S S TN10 X P30 X Single Point Switch - Metallic Tank
CS3200 S D TN15 X P30 P50 Dual Point Switch - Metallic Tank
CS3200 S N TN15 X P30 P30 Single Point Switch - Non-Metallic Tank
Remote Probe
Non-standard probe lengths available. Contact Factory.