1.19
1.19
SPECIFICATIONS
TRANSMISSION SYSTEM
Drive Type:
Pump:
Wheel Motors:
Differential Lock:
Drive:
Relief Valve Setting:
Drive Type:
Pump:
Delivery Rate:
Cutterdeck Motors:
Control:
Relief Valve Setting:
Hydraulic.
Variable displacement hydraulic piston pump with
integral charge pump and servo control.
Front Axle - Twin lock radial piston, fixed displacement, with
integral disc brake (pressure released)
Rear Axle - Radial piston, fixed displacement with pedal con-
trol (only available in work mode).
Electro - hydraulic control valve.
Front wheel drive in ‘Work’ and ‘Transport’ modes.
Main service relief 350 bar (5075 psi) differential.
Charge pressure relief 29 bar (421 psi) differential.
Hydraulic.
Tandem hydraulic gear type.
45.3 Litres per minute - All decks (10 UK gallons per minute).
Hydraulic motors, pressure balanced
with integral differential pressure sensing relief check valve.
Direct drive to cutterblades.
Electro-hydraulic.
Automatic safety cut-off.
250 bar (3625 psi) differential.
CUTTERDECK DRIVE SYSTEM
To Next Page
Loading...
Need help?
General
