1.21
1.21
SPECIFICATIONS
Wheel Nut Torque Setting: Front axle 200Nm (148 Ibf.ft)
Rear axle 54Nm (40 Ibf.ft)
Service Brakes: Closed loop hydrostatic service braking operating on drive wheels only.
Parking Brake: Lever operated oil immersed disc brakes on front wheels only. Pressurised hydraulic oil
release with mechanical override for towing purposes.
Ground Clearance: 180mm (7.1") with cutterdecks raised.
Steering: Hydrostatic rear wheel steering, emergency manual steering.
Features: Tilting operator platform.
Lockable engine cover.
Adjustable suspension seat with folding arms.
Adjustable Steering Column.
Cutterdeck parking latches with safety lock.
Differential lock.
Engine coolant and hydraulic oil overheat audible warning (horn).
Hydraulic oil filter blocked telltales on control panel.
Wing arm breakback.
Safety Features: Neutral start interlock on transmission control pump, parking brake
and cutterdeck drive switch.
Neutral start telltales on control panel.
Operator presence control (seat switch).
Cutterdeck drive automatic cut-off on lift.
2 Post folding R.O.P.S designed and tested to European Directive 79/622/EEC.
VEHICLE SPECIFICATIONS
Travel Speed:
0-25 km/h (0-15 mph) forward.
0-11 km/h (0-7 mph) reverse.
Tyres Tyre Type
Front axle
Rear axle
0.7 bar
(10 psi )
0.7 bar
(10 psi).
1.4 bar
(20 psi)
1.4 bar
(20 psi)
Recommended Tyre Pressures
Turf Conditions
Max Pressure
Road Conditions
26 x 12 - 12 4 ply
Trelleborg turf pattern.
20 x 10.0 - 8 4 ply
Dico turf pattern.
1.7 bar
(25 psi)
1.7 bar
(25 psi)
To Next Page
Loading...
Need help?
General
