HBM AED9101D - Markings Used; Symbols on the Device; Document Marking Conventions

AED9101D
I3563-1.0 en 7
2 Markings used
2.1 Symbols on the device
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the relev-
ant EC directives (the Declaration of Conformity can be
found on the HBM website (www.hbm.com) under HBM-
doc).
Statutory waste disposal mark
In accordance with national and local environmental pro-
tection and material recovery and recycling regulations,
old devices that can no longer be used must be disposed
of separately and not with normal household garbage.
Also see Section7 on page31.
2.2 The marking used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Symbol Meaning
Note
This marking draws your attention to a situation in
which failure to comply with safety requirements
could lead to damage to property.
Important
This marking draws your attention to important
information about the product or about handling the
product.