Safety instructions
12 I3031-14.0 HBM: public Quantum
X
S Consequences:describes the consequences of non-
compliance
S Defense: indicates how the danger can be avoided/
bypassed.
Danger classes as per ANSI
Warning sign, signal word Meaning
WARNING
This marking warns of a potentially dangerous situ
ation in which failure to comply with safety require
ments may result in death or serious physical injury.
CAUTION
This marking warns of a potentially dangerous situ
ation in which failure to comply with safety require
ments may result in slight or moderate physical injury.
Note
This marking draws your attention to a situation in
which failure to comply with safety requirements may
lead to damage to property.
Working safely
The supply connection, as well as the signal and sensor
leads, must be installed in such a way that
electromagnetic interference does not adversely affect
device functionality (HBM recommendation: "Greenline
shielding design", downloadable from the Internet at
http://www.hbm.com/Greenline).
Automation equipment and devices must be covered
over in such a way that adequate protection or locking
against unintentional actuation is provided (e.g. access
checks, password protection, etc.).
When devices are working in a network, these networks
must be designed in such a way that malfunctions in
individual nodes can be detected and shut down.
Safety precautions must be taken both in terms of
hardware and software, so that a line break or other
To Next Page
Loading...
