19©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
10 Preparing the Stud Welding Gun
10 Preparing the Stud Welding Gun
Prepare the stud welding gun by
– mounting the chuck
– mounting the leg assembly
– adjusting lift and spring force
– adjusting the insertion depth (protrusion).
Do not connect the stud welding gun to the stud welding unit until it has
been prepared.
In this way you can avoid any unintentional starting of the welding process.
To Next Page
Loading...
