©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
5 Technical Data
5 Technical Data
Stud Welding Unit CDi 2302 ((with digital display)
for CD stud welding (capacitor discharge welding) according to current standards
Welding range Studs M3 - M8, (M10 limited),
dia. 2 - 8 mm, (dia. 10 mm limited)
Welding material Mild steel, stainless steel, aluminium and brass
Welding rate M3 = 33 studs/min. (Charging voltage 60 V)
M8 = 12 studs/min. (Charging voltage 170 V)
(M10 = 9 studs/min. (Charging voltage 210 V))
Capacitance 99 000 µF
Welding time 1 to 3 ms
Energy 2 400 Ws
Charging voltage 50 to 220 V (stepless voltage regulation)
Primary power 230 V/115 V, 50/60 Hz, 10 AT
Power source Capacitor
Cooling type F (temperature controlled cooling fan)
IP Code IP 23 (also permits operation outdoors)
Ambient temperature limits 0 °C to 40 °C
Dimension L x W x H 480 x 205 x 250 mm (without handle)
Weight 17 kg
To Next Page
Loading...
