HDFury Vertex2 - Page 50

Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
50
4K Vertex² – User Manual
#vertex2 set avicustom x
where x is [on / off]
Starts to output custom AVI infoframe and ignores any input received AVI metadata.
Ex. #vertex2 set avicustom on
#vertex2 set avidisable x
where x is [on / off]
Stops sending any AVI infoframe content
Ex. #vertex2 set avidisable on
#vertex2 set cec x
where x is [on / off]
Sets the CEC engine
Ex. #vertex2 set cec on
#vertex2 set cecla x
where x is [video / audio]
Sets the CEC engine logical address. For video [14] and for audio [5].
Ex. #vertex2 set cecla audio
#vertex2 set archbr x
where x is [on / off]
Sets the ARC capability to include DD+ / ATMOS over DD+ capability.
Ex. #vertex2 set archbr on
#vertex2 set oled x
where x is [on / off]
Sets the OLED display visibility
Ex. #vertex2 set oled on
#vertex2 set oledrev x
where x is [on / off]
Sets the OLED display reversed colors
Ex. #vertex2 set oledrev on
#vertex2 set oledrot x
where x is [on / off]
Sets the OLED display rotation
Ex. #vertex2 set oledrot on
#vertex2 set oledpage x
where x is [0-4]
Sets the OLED display page
Ex. #vertex2 set oledpage 0